4 files changed, 53 insertions, 0 deletions
diff --git a/openhop/repeater/vars/boards/rak6421-slot1.yaml b/openhop/repeater/vars/boards/rak6421-slot1.yaml
new file mode 100644
index 0000000..464a194
--- /dev/null
+++ b/openhop/repeater/vars/boards/rak6421-slot1.yaml
@@ -0,0 +1,15 @@
+---
+# RAK6421 WisMesh Pi HAT — RAK13302 (SX1262 + 1W SKY66122 FEM) in SLOT 1.
+# Source: meshtastic/firmware bin/config.d/lora-RAK6421-13302-slot1.yaml
+repeater_sx1262_bus_id: 0            # spidev0.0
+repeater_sx1262_cs_id: 0            # CE0 (BCM 8)
+repeater_sx1262_cs_pin: 8
+repeater_sx1262_reset_pin: 16
+repeater_sx1262_busy_pin: 24
+repeater_sx1262_irq_pin: 22          # DIO1
+repeater_sx1262_use_dio3_tcxo: true
+repeater_sx1262_dio3_tcxo_voltage: 1.8
+repeater_sx1262_use_dio2_rf: true
+repeater_sx1262_txen_pin: 12         # SKY66122 FEM enable (verify TX vs RX)
+repeater_sx1262_rxen_pin: 13         # SKY66122 FEM enable (verify TX vs RX)
+repeater_sx1262_is_waveshare: false
diff --git a/openhop/repeater/vars/boards/rak6421-slot2.yaml b/openhop/repeater/vars/boards/rak6421-slot2.yaml
new file mode 100644
index 0000000..71a5fb9
--- /dev/null
+++ b/openhop/repeater/vars/boards/rak6421-slot2.yaml
@@ -0,0 +1,15 @@
+---
+# RAK6421 WisMesh Pi HAT — RAK13302 (SX1262 + 1W SKY66122 FEM) in SLOT 2.
+# Source: meshtastic/firmware bin/config.d/lora-RAK6421-13302-slot2.yaml
+repeater_sx1262_bus_id: 0            # spidev0.1
+repeater_sx1262_cs_id: 1            # CE1 (BCM 7)
+repeater_sx1262_cs_pin: 7
+repeater_sx1262_reset_pin: 24
+repeater_sx1262_busy_pin: 19
+repeater_sx1262_irq_pin: 18          # DIO1
+repeater_sx1262_use_dio3_tcxo: true
+repeater_sx1262_dio3_tcxo_voltage: 1.8
+repeater_sx1262_use_dio2_rf: true
+repeater_sx1262_txen_pin: 26         # SKY66122 FEM enable (verify TX vs RX)
+repeater_sx1262_rxen_pin: 23         # SKY66122 FEM enable (verify TX vs RX)
+repeater_sx1262_is_waveshare: false
diff --git a/openhop/repeater/vars/rf/eu.yaml b/openhop/repeater/vars/rf/eu.yaml
new file mode 100644
index 0000000..11fca12
--- /dev/null
+++ b/openhop/repeater/vars/rf/eu.yaml
@@ -0,0 +1,12 @@
+---
+# MeshCore EU 863-870 MHz preset.
+# WARNING: every node on your mesh MUST share identical frequency / bandwidth /
+#          spreading_factor / coding_rate. Confirm these against your local
+#          MeshCore EU community settings, and respect the sub-band duty-cycle /
+#          power limits before deploying.
+repeater_frequency_hz: 869525000     # 869.525 MHz
+repeater_bandwidth_hz: 250000
+repeater_spreading_factor: 11        # 7-12
+repeater_coding_rate: 5              # 5-8
+repeater_preamble_length: 32
+repeater_tx_power_dbm: 14            # keep within the chosen EU sub-band limit
diff --git a/openhop/repeater/vars/rf/us.yaml b/openhop/repeater/vars/rf/us.yaml
new file mode 100644
index 0000000..e20b1c6
--- /dev/null
+++ b/openhop/repeater/vars/rf/us.yaml
@@ -0,0 +1,11 @@
+---
+# MeshCore US 902-928 MHz preset.
+# WARNING: every node on your mesh MUST share identical frequency / bandwidth /
+#          spreading_factor / coding_rate. Confirm these against your local
+#          MeshCore US community settings before deploying.
+repeater_frequency_hz: 910525000     # 910.525 MHz
+repeater_bandwidth_hz: 250000
+repeater_spreading_factor: 11        # 7-12
+repeater_coding_rate: 5              # 5-8
+repeater_preamble_length: 32
+repeater_tx_power_dbm: 22            # SX1262 register max; SKY66122 boosts to ~1W