# The Scrypted docker-compose.yml file typically resides at:

# ~/.scrypted/docker-compose.yml

# Scrypted NVR Storage (Optional Network Volume: Part 1 of 3)

# Example volumes SMB (CIFS) and NFS.

# Uncomment only one.

# volumes:

#     nvr:

#         driver_opts:

#             type: cifs

#             o: username=[username],password=[password],vers=3.0,file_mode=0777,dir_mode=0777

#             device: //[ip-address]/[path-to-directory]

#     nvr:

#         driver_opts:

#             type: "nfs"

#             o: "addr=[ip-address],nolock,soft,rw"

#             device: ":[path-to-directory]"

services:

    scrypted:

        environment:

            # Scrypted NVR Storage (Part 2 of 3)

            # Uncomment the next line to configure the NVR plugin to store recordings

            # use the /nvr directory within the container. This can also be configured

            # within the plugin manually.

            # The drive or network share will ALSO need to be configured in the volumes

            # section below.

            # - SCRYPTED_NVR_VOLUME=/nvr

            - SCRYPTED_WEBHOOK_UPDATE_AUTHORIZATION=Bearer {{scrypted_auth_key}}

            - SCRYPTED_WEBHOOK_UPDATE=http://localhost:{{scrypted_auto_update_port}}/v1/update

            # Avahi can be used for network discovery by passing in the host daemon

            # or running the daemon inside the container. Choose one or the other.

            # Uncomment next line to run avahi-daemon inside the container.

            # See volumes and security_opt section below to use the host daemon.

            # - SCRYPTED_DOCKER_AVAHI=true

            # NVIDIA (Part 1 of 4)

            # - NVIDIA_VISIBLE_DEVICES=all

            # - NVIDIA_DRIVER_CAPABILITIES=all

        # NVIDIA (Part 2 of 4)

        # runtime: nvidia

        # NVIDIA (Part 3 of 4) - Use NVIDIA image, and remove subsequent default image.

        # image: ghcr.io/koush/scrypted:nvidia

        image: ghcr.io/koush/scrypted

        volumes:

            # NVIDIA (Part 4 of 4)

            # - /etc/OpenCL/vendors/nvidia.icd:/etc/OpenCL/vendors/nvidia.icd

            # Scrypted NVR Storage (Part 3 of 3)

            # Modify to add the additional volume for Scrypted NVR.

            # The following example would mount the /mnt/sda/video path on the host

            # to the /nvr path inside the docker container.

            # - /mnt/media/video:/nvr

            # Or use a network mount from one of the CIFS/NFS examples at the top of this file.

            # - type: volume

            #   source: nvr

            #   target: /nvr

            #   volume:

            #     nocopy: true

            # Uncomment the following lines to use Avahi daemon from the host.

            # Ensure Avahi is running on the host machine:

            # It can be installed with: sudo apt-get install avahi-daemon

            # This is not compatible with running avahi inside the container (see above).

            # Also, uncomment the lines under security_opt

            - /var/run/dbus:/var/run/dbus

            - /var/run/avahi-daemon/socket:/var/run/avahi-daemon/socket

            # Default volume for the Scrypted database. Typically should not be changed.

            - {{scrypted_dir}}/volume:/server/volume

        # Uncomment the following lines to use Avahi daemon from the host

        # Without this, AppArmor will block the container's attempt to talk to Avahi via dbus

        security_opt:

            - apparmor:unconfined

        devices: [

            # uncomment the common systems devices to pass

            # them through to docker.

            # all usb devices, such as coral tpu

            # "/dev/bus/usb:/dev/bus/usb",

            # hardware accelerated video decoding, opencl, etc.

            # "/dev/dri:/dev/dri",

            # uncomment below as necessary.

            # zwave usb serial device

            # "/dev/ttyACM0:/dev/ttyACM0",

            # coral PCI devices

            # "/dev/apex_0:/dev/apex_0",

            # "/dev/apex_1:/dev/apex_1",

        ]

        container_name: scrypted

        restart: unless-stopped

        network_mode: host

        # logging is noisy and will unnecessarily wear on flash storage.

        # scrypted has per device in memory logging that is preferred.

        # enable the log file if enhanced debugging is necessary.

        logging:

            driver: "none"

            # driver: "json-file"

            # options:

            #     max-size: "10m"

            #     max-file: "10"

        labels:

            - "com.centurylinklabs.watchtower.scope=scrypted"

    # watchtower manages updates for Scrypted.

    watchtower:

        environment:

            - WATCHTOWER_HTTP_API_TOKEN={{scrypted_auth_key}}

            - WATCHTOWER_HTTP_API_UPDATE=true

            - WATCHTOWER_SCOPE=scrypted

            # remove the following line to never allow docker to auto update.

            # this is not recommended.

            - WATCHTOWER_HTTP_API_PERIODIC_POLLS=true

        image: containrrr/watchtower

        container_name: scrypted-watchtower

        restart: unless-stopped

        volumes:

            - /var/run/docker.sock:/var/run/docker.sock

        labels:

            - "com.centurylinklabs.watchtower.scope=scrypted"

        ports:

            # The auto update port 10444 can be configured

            # Must match the port in the auto update url above.

            - {{scrypted_auto_update_port}}:8080

        # check for updates once an hour (interval is in seconds)

        command: --interval 3600 --cleanup --scope scrypted