# This is the Dendrite configuration file.

#

# The configuration is split up into sections - each Dendrite component has a

# configuration section, in addition to the "global" section which applies to

# all components.

#

# At a minimum, to get started, you will need to update the settings in the

# "global" section for your deployment, and you will need to check that the

# database "connection_string" line in each component section is correct.

#

# Each component with a "database" section can accept the following formats

# for "connection_string":

#   SQLite:     file:filename.db

#               file:///path/to/filename.db

#   PostgreSQL: postgresql://user:pass@hostname/database?params=...

#

# SQLite is embedded into Dendrite and therefore no further prerequisites are

# needed for the database when using SQLite mode. However, performance with

# PostgreSQL is significantly better and recommended for multi-user deployments.

# SQLite is typically around 20-30% slower than PostgreSQL when tested with a

# small number of users and likely will perform worse still with a higher volume

# of users.

#

# The "max_open_conns" and "max_idle_conns" settings configure the maximum

# number of open/idle database connections. The value 0 will use the database

# engine default, and a negative value will use unlimited connections. The

# "conn_max_lifetime" option controls the maximum length of time a database

# connection can be idle in seconds - a negative value is unlimited.

# The version of the configuration file.

version: 1

# Global Matrix configuration. This configuration applies to all components.

global:

  # The domain name of this homeserver.

  server_name: {{dendrite_name}}

  # The path to the signing private key file, used to sign requests and events.

  # Note that this is NOT the same private key as used for TLS! To generate a

  # signing key, use "./bin/generate-keys --private-key matrix_key.pem".

  private_key: matrix_key.pem

  # The paths and expiry timestamps (as a UNIX timestamp in millisecond precision)

  # to old signing private keys that were formerly in use on this domain. These

  # keys will not be used for federation request or event signing, but will be

  # provided to any other homeserver that asks when trying to verify old events.

  old_private_keys:

  - private_key: old_matrix_key.pem

    expired_at: 1626538450

  # How long a remote server can cache our server signing key before requesting it

  # again. Increasing this number will reduce the number of requests made by other

  # servers for our key but increases the period that a compromised key will be

  # considered valid by other homeservers.

  key_validity_period: 168h0m0s

  # Lists of domains that the server will trust as identity servers to verify third

  # party identifiers such as phone numbers and email addresses.

  trusted_third_party_id_servers:

  - matrix.org

  - vector.im

  # Disables federation. Dendrite will not be able to make any outbound HTTP requests

  # to other servers and the federation API will not be exposed.

  disable_federation: false

  # Configuration for Kafka/Naffka.

  kafka:

    # List of Kafka broker addresses to connect to. This is not needed if using

    # Naffka in monolith mode.

    addresses:

      - localhost:2181

    # The prefix to use for Kafka topic names for this homeserver. Change this only if

    # you are running more than one Dendrite homeserver on the same Kafka deployment.

    topic_prefix: Dendrite

    # Whether to use Naffka instead of Kafka. This is only available in monolith

    # mode, but means that you can run a single-process server without requiring

    # Kafka.

    use_naffka: true

    # The max size a Kafka message is allowed to use.

    # You only need to change this value, if you encounter issues with too large messages.

    # Must be less than/equal to "max.message.bytes" configured in Kafka.

    # Defaults to 8388608 bytes.

    # max_message_bytes: 8388608

    # Naffka database options. Not required when using Kafka.

    naffka_database:

      connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

      max_open_conns: 10

      max_idle_conns: 2

      conn_max_lifetime: -1

  # Configuration for Prometheus metric collection.

  metrics:

    # Whether or not Prometheus metrics are enabled.

    enabled: true

    # HTTP basic authentication to protect access to monitoring.

    basic_auth:

      username: metrics

      password: metrics

  # DNS cache options. The DNS cache may reduce the load on DNS servers

  # if there is no local caching resolver available for use.

  dns_cache:

    # Whether or not the DNS cache is enabled.

    enabled: false

    # Maximum number of entries to hold in the DNS cache, and

    # for how long those items should be considered valid in seconds.

    cache_size: 256

    cache_lifetime: "5m" # 5minutes; see https://pkg.go.dev/time@master#ParseDuration for more

# Configuration for the Appservice API.

app_service_api:

  internal_api:

    listen: http://localhost:7777

    connect: http://localhost:7777

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

  # Disable the validation of TLS certificates of appservices. This is

  # not recommended in production since it may allow appservice traffic

  # to be sent to an unverified endpoint.

  disable_tls_validation: false

  # Appservice configuration files to load into this homeserver.

  config_files: []

# Configuration for the Client API.

client_api:

  internal_api:

    listen: http://localhost:7771

    connect: http://localhost:7771

  external_api:

    listen: http://[::]:8071

  # Prevents new users from being able to register on this homeserver, except when

  # using the registration shared secret below.

  registration_disabled: false

  # If set, allows registration by anyone who knows the shared secret, regardless of

  # whether registration is otherwise disabled.

  registration_shared_secret: ""

  # Whether to require reCAPTCHA for registration.

  enable_registration_captcha: false

  # Settings for ReCAPTCHA.

  recaptcha_public_key: ""

  recaptcha_private_key: ""

  recaptcha_bypass_secret: ""

  recaptcha_siteverify_api: ""

  # TURN server information that this homeserver should send to clients.

  turn:

    turn_user_lifetime: ""

    turn_uris: []

    turn_shared_secret: ""

    turn_username: ""

    turn_password: ""

  # Settings for rate-limited endpoints. Rate limiting will kick in after the

  # threshold number of "slots" have been taken by requests from a specific

  # host. Each "slot" will be released after the cooloff time in milliseconds.

  rate_limiting:

    enabled: true

    threshold: 5

    cooloff_ms: 500

# Configuration for the EDU server.

edu_server:

  internal_api:

    listen: http://localhost:7778

    connect: http://localhost:7778

# Configuration for the Federation API.

federation_api:

  internal_api:

    listen: http://localhost:7772

    connect: http://localhost:7772

  external_api:

    listen: http://[::]:8072

  # List of paths to X.509 certificates to be used by the external federation listeners.

  # These certificates will be used to calculate the TLS fingerprints and other servers

  # will expect the certificate to match these fingerprints. Certificates must be in PEM

  # format.

  federation_certificates: []

# Configuration for the Federation Sender.

federation_sender:

  internal_api:

    listen: http://localhost:7775

    connect: http://localhost:7775

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

  # How many times we will try to resend a failed transaction to a specific server. The

  # backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.

  send_max_retries: 16

  # Disable the validation of TLS certificates of remote federated homeservers. Do not

  # enable this option in production as it presents a security risk!

  disable_tls_validation: false

  # Use the following proxy server for outbound federation traffic.

  proxy_outbound:

    enabled: false

    protocol: http

    host: localhost

    port: 8080

# Configuration for the Key Server (for end-to-end encryption).

key_server:

  internal_api:

    listen: http://localhost:7779

    connect: http://localhost:7779

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

# Configuration for the Media API.

media_api:

  internal_api:

    listen: http://localhost:7774

    connect: http://localhost:7774

  external_api:

    listen: http://[::]:8074

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 5

    max_idle_conns: 2

    conn_max_lifetime: -1

  # Storage path for uploaded media. May be relative or absolute.

  base_path: ./media_store

  # The maximum allowed file size (in bytes) for media uploads to this homeserver

  # (0 = unlimited). If using a reverse proxy, ensure it allows requests at

  # least this large (e.g. client_max_body_size in nginx.)

  max_file_size_bytes: 10485760

  # Whether to dynamically generate thumbnails if needed.

  dynamic_thumbnails: false

  # The maximum number of simultaneous thumbnail generators to run.

  max_thumbnail_generators: 10

  # A list of thumbnail sizes to be generated for media content.

  thumbnail_sizes:

  - width: 32

    height: 32

    method: crop

  - width: 96

    height: 96

    method: crop

  - width: 640

    height: 480

    method: scale

# Configuration for experimental MSC's

mscs:

  # A list of enabled MSC's

  # Currently valid values are:

  # - msc2836    (Threading, see https://github.com/matrix-org/matrix-doc/pull/2836)

  # - msc2946    (Spaces Summary, see https://github.com/matrix-org/matrix-doc/pull/2946)

  mscs: []

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 5

    max_idle_conns: 2

    conn_max_lifetime: -1

# Configuration for the Room Server.

room_server:

  internal_api:

    listen: http://localhost:7770

    connect: http://localhost:7770

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

# Configuration for the Signing Key Server (for server signing keys).

signing_key_server:

  internal_api:

    listen: http://localhost:7780

    connect: http://localhost:7780

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

  # Perspective keyservers to use as a backup when direct key fetches fail. This may

  # be required to satisfy key requests for servers that are no longer online when

  # joining some rooms.

  key_perspectives:

  - server_name: matrix.org

    keys:

    - key_id: ed25519:auto

      public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw

    - key_id: ed25519:a_RXGa

      public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ

  # This option will control whether Dendrite will prefer to look up keys directly

  # or whether it should try perspective servers first, using direct fetches as a

  # last resort.

  prefer_direct_fetch: false

# Configuration for the Sync API.

sync_api:

  internal_api:

    listen: http://localhost:7773

    connect: http://localhost:7773

  external_api:

    listen: http://[::]:8073

  database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

  # This option controls which HTTP header to inspect to find the real remote IP

  # address of the client. This is likely required if Dendrite is running behind

  # a reverse proxy server.

  # real_ip_header: X-Real-IP

# Configuration for the User API.

user_api:

  # The cost when hashing passwords on registration/login. Default: 10. Min: 4, Max: 31

  # See https://pkg.go.dev/golang.org/x/crypto/bcrypt for more information.

  # Setting this lower makes registration/login consume less CPU resources at the cost of security

  # should the database be compromised. Setting this higher makes registration/login consume more

  # CPU resources but makes it harder to brute force password hashes.

  # This value can be low if performing tests or on embedded Dendrite instances (e.g WASM builds)

  # bcrypt_cost: 10

  internal_api:

    listen: http://localhost:7781

    connect: http://localhost:7781

  account_database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

  device_database:

    connection_string: "postgres://{{dendrite_db_user}}:{{dendrite_db_pass}}@localhost/{{dendrite_db}}"

    max_open_conns: 10

    max_idle_conns: 2

    conn_max_lifetime: -1

  # The length of time that a token issued for a relying party from

  # /_matrix/client/r0/user/{userId}/openid/request_token endpoint

  # is considered to be valid in milliseconds.

  # The default lifetime is 3600000ms (60 minutes).

  # openid_token_lifetime_ms: 3600000

# Configuration for Opentracing.

# See https://github.com/matrix-org/dendrite/tree/master/docs/tracing for information on

# how this works and how to set it up.

tracing:

  enabled: false

  jaeger:

    serviceName: ""

    disabled: false

    rpc_metrics: false

    tags: []

    sampler: null

    reporter: null

    headers: null

    baggage_restrictions: null

    throttler: null

# Logging configuration, in addition to the standard logging that is sent to

# stdout by Dendrite.

logging:

- type: file

  level: info

  params:

    path: ./logs