1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
|
#include "button.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "esp_system.h"
#include "esp_timer.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "display.h"
#include "local_screens.h"
#include "nvs_config.h"
static const char *TAG = "button";
// TODO confirm against the Waveshare ESP32-P4-ETH schematic. ESP32-P4's
// strapping pin is GPIO35 but that's owned by RMII TXD1 at runtime. Most
// Waveshare ESP32-P4 boards expose an additional user/BOOT button on a
// free GPIO; GPIO0 is the conventional default if a separate button isn't
// available. The button task fail-soft: if the pin reads stuck-high (no
// button), it just never fires.
#define PIN_BOOT_BUTTON 0
#define POLL_PERIOD_MS 30
#define LONG_HOLD_MS 5000
#define OVERLAY_MS 15000
static void start_overlay(void)
{
if (!display_is_up()) return;
local_screens_overlay(OVERLAY_MS);
ESP_LOGI(TAG, "BOOT short-press → identity overlay for %dms", OVERLAY_MS);
}
static void factory_reset(void)
{
ESP_LOGW(TAG, "BOOT held %dms → factory reset", LONG_HOLD_MS);
nvs_config_reset();
vTaskDelay(pdMS_TO_TICKS(200)); // let log flush
esp_restart();
}
static void button_task(void *arg)
{
bool was_pressed = false;
uint64_t press_started = 0;
bool long_fired = false;
for (;;) {
vTaskDelay(pdMS_TO_TICKS(POLL_PERIOD_MS));
bool pressed = (gpio_get_level(PIN_BOOT_BUTTON) == 0); // active-low
if (pressed && !was_pressed) {
press_started = (uint64_t)esp_timer_get_time();
long_fired = false;
was_pressed = true;
} else if (pressed && was_pressed) {
uint64_t held_ms = ((uint64_t)esp_timer_get_time() - press_started) / 1000ULL;
if (!long_fired && held_ms >= LONG_HOLD_MS) {
long_fired = true;
factory_reset(); // does not return
}
} else if (!pressed && was_pressed) {
uint64_t held_ms = ((uint64_t)esp_timer_get_time() - press_started) / 1000ULL;
was_pressed = false;
if (!long_fired && held_ms < LONG_HOLD_MS) {
start_overlay();
}
}
}
}
esp_err_t button_init(void)
{
gpio_config_t cfg = {
.pin_bit_mask = 1ULL << PIN_BOOT_BUTTON,
.mode = GPIO_MODE_INPUT,
.pull_up_en = GPIO_PULLUP_ENABLE,
.pull_down_en = GPIO_PULLDOWN_DISABLE,
.intr_type = GPIO_INTR_DISABLE,
};
esp_err_t err = gpio_config(&cfg);
if (err != ESP_OK) {
ESP_LOGW(TAG, "gpio_config GPIO%d failed: %s — button disabled",
PIN_BOOT_BUTTON, esp_err_to_name(err));
return err;
}
BaseType_t ok = xTaskCreate(button_task, "boot_btn", 3072, NULL, 3, NULL);
if (ok != pdPASS) return ESP_FAIL;
ESP_LOGI(TAG, "BOOT button on GPIO%d (short=IP overlay 15s, hold 5s=factory reset)",
PIN_BOOT_BUTTON);
return ESP_OK;
}
|
