#include "touch.h" #include #include "driver/i2c_master.h" #include "esp_check.h" #include "esp_log.h" #include "esp_timer.h" #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "display.h" #include "local_screens.h" #include "state_machine.h" #include "viewport_state.h" static const char *TAG = "touch"; #define FT5426_ADDR 0x38 #define FT5426_I2C_FREQ_HZ 400000 #define FT_REG_DEV_MODE 0x00 #define FT_REG_TD_STATUS 0x02 #define FT_REG_P1_XH 0x03 #define POLL_PERIOD_MS 30 #define TAP_MAX_MS 500 // < this on release = short tap (toggle) #define LONG_PRESS_MS 1500 // ≥ this while held = info overlay #define OVERLAY_MS 15000 #define TAP_DEBOUNCE_MS 150 static i2c_master_dev_handle_t s_dev; static esp_err_t ft_read(uint8_t reg, uint8_t *buf, size_t n) { return i2c_master_transmit_receive(s_dev, ®, 1, buf, n, 50); } static void on_short_tap(void) { if (local_screens_overlay_active()) local_screens_overlay_dismiss(); viewport_run_state_t target = (state_machine_current() == VIEWPORT_STATE_AWAKE) ? VIEWPORT_STATE_ASLEEP : VIEWPORT_STATE_AWAKE; ESP_LOGI(TAG, "tap -> %s", target == VIEWPORT_STATE_AWAKE ? "wake" : "sleep"); state_machine_set_local(target); } static void on_long_press(void) { ESP_LOGI(TAG, "long-press → info overlay for %dms", OVERLAY_MS); if (display_is_up()) local_screens_overlay(OVERLAY_MS); } static void touch_task(void *arg) { bool was_down = false; uint64_t down_us = 0; bool long_fired = false; uint64_t last_tap_us = 0; uint8_t buf[7]; for (;;) { vTaskDelay(pdMS_TO_TICKS(POLL_PERIOD_MS)); if (ft_read(FT_REG_DEV_MODE, buf, sizeof(buf)) != ESP_OK) continue; uint8_t touches = buf[FT_REG_TD_STATUS] & 0x0F; // FT5x06 supports max 5 simultaneous points; anything above that // is a bogus reading (chip parking 0xff during a transient). if (touches > 5) continue; uint64_t now = (uint64_t)esp_timer_get_time(); if (touches > 0) { if (!was_down) { was_down = true; down_us = now; long_fired = false; } else { uint64_t held_ms = (now - down_us) / 1000ULL; if (!long_fired && held_ms >= LONG_PRESS_MS) { long_fired = true; on_long_press(); } } } else if (was_down) { was_down = false; uint64_t held_ms = (now - down_us) / 1000ULL; if (now - last_tap_us < (uint64_t)TAP_DEBOUNCE_MS * 1000ULL) continue; // Short tap only fires on release; long-press already fired // while the finger was still down. if (!long_fired && held_ms > 0 && held_ms <= TAP_MAX_MS) { last_tap_us = now; on_short_tap(); } } } } esp_err_t touch_init(void) { i2c_master_bus_handle_t bus = display_i2c_bus(); if (!bus) { ESP_LOGW(TAG, "I2C bus unavailable — display didn't come up; skipping touch"); return ESP_ERR_INVALID_STATE; } i2c_device_config_t cfg = { .dev_addr_length = I2C_ADDR_BIT_LEN_7, .device_address = FT5426_ADDR, .scl_speed_hz = FT5426_I2C_FREQ_HZ, }; ESP_RETURN_ON_ERROR(i2c_master_bus_add_device(bus, &cfg, &s_dev), TAG, "i2c add FT5426"); // No dev_mode read here: the FT5426 starts reporting contacts only // after the LCD has streamed with the backlight on at least once // (handled by the wake-on-boot flash in app_main). Any read before // that returns 0xff, which the polling loop's >5 sanity filter // already drops. ESP_LOGI(TAG, "FT5426 polling started " "(tap=toggle wake/sleep, %dms hold=info overlay)", LONG_PRESS_MS); BaseType_t ok = xTaskCreate(touch_task, "touch", 3072, NULL, 4, NULL); return (ok == pdPASS) ? ESP_OK : ESP_FAIL; }