From cbc4904aa35191f59aff93df5ed36f09f4cfa943 Mon Sep 17 00:00:00 2001 From: Luke Hoersten Date: Sun, 14 Jun 2026 17:37:51 -0500 Subject: Info screen: full /config + /state dump, replaces identity screen MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously the 4-line "identity" screen showed only viewport name, mDNS host, IP, and state. Expanded to 15 lines covering the full GET /config + GET /state output (name, host, ip, state, configured, scrypted, orientation, brightness, idle, fw, uptime, frames, errs, free heap, free PSRAM), label/value pairs left-aligned with auto-scaled font. Renames "identity" → "info" throughout — symbol, log messages, README/TESTING references. Also: - Move the info-screen render's big locals (~1.6 KiB: lines[16][80] + scrypt[256] + vp_name[64]) to BSS. The touch task's 3 KiB stack was overflowing on every long-press, leaving whatever frame was previously on the panel — gave the appearance of a "blue screen" after the M5 test pattern. - Drop the ≥5 s touch factory-reset gesture and remove all stale references to it in docs and comments. NVS wipe is now a USB-side `idf.py erase-flash` operation only. - M5 follow-up TODO in jpeg_decoder.c: solid green renders ~black and solid blue renders green; not a byte-order issue (BGR setting turns red into blue). Tracked as a known M5 gap. --- main/app_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'main/app_main.c') diff --git a/main/app_main.c b/main/app_main.c index 2cb395e..44e2052 100644 --- a/main/app_main.c +++ b/main/app_main.c @@ -72,9 +72,9 @@ void app_main(void) // config is even slightly off; keeping that off the main task means // a misconfigured panel can't take down networking + /state. The // task also brings up the JPEG decoder and touch (touch shares the - // panel I²C bus and also handles long-press → identity overlay and - // very-long-press → factory reset, since the board's BOOT button is - // wired to a strap pin (GPIO35) that the EMAC owns at runtime). + // panel I²C bus and also handles long-press → info overlay, since + // the board's BOOT button is wired to a strap pin (GPIO35) that the + // EMAC owns at runtime). // ------------------------------------------------------------------ ESP_LOGI(TAG, "boot complete — net subsystems [%s] ip=%s; " "display init deferred to dsp_init task", -- cgit v1.2.3