| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
DSI / panel:
- LDO_VO3 acquired at 2500 mV (VDD_MIPI_DPHY) — without this the PHY
PLL busy-waits forever inside esp_lcd_new_dsi_bus.
- PSRAM bumped to 200 MHz (CONFIG_IDF_EXPERIMENTAL_FEATURES) to keep
the DPI fed without underruns.
- Pi-7"-style 800x480 panel init (REG_POWERON, PORTA/PORTB/PWM/PORTC)
+ 16-bit RGB565 framebuffer with portrait-mode rotation buffer in
PSRAM. Currently shows garbled output — known issue, next commit
switches to the TC358762-bridge-aware init sequence.
State + UX:
- viewport_state simplified to AWAKE/ASLEEP only; "unconfigured" is
a flag, not a state. Tap always toggles; content choice (identity
vs frame) is driven by the configured flag.
- BOOT button arms a 15 s identity overlay via local_screens_overlay;
expired callback returns to prior state.
- Boot-done indicator: two backlight flashes (no usable LED GPIO on
the Waveshare board — GPIO 35 BOOT is shared with EMAC TXD1).
- Best-effort subsystem init in app_main; display init deferred to
its own task so a panel hang can't block networking.
Display test pattern: solid R/G/B for 2 s each on boot to characterize
the garble independent of text rendering.
|
|
net_eth module brings up the Waveshare ESP32-P4-ETH-POE Ethernet
interface (internal EMAC + IP101GRI PHY) and waits for a DHCP lease.
Pin map confirmed via Waveshare wiki + ESPHome's working config:
MDC=31, MDIO=52, REF_CLK=50 (CLK_EXT_IN from PHY)
TX_EN=49, TXD0=34, TXD1=35
CRS_DV=28, RXD0=30, RXD1=29
PHY reset/enable=51, PHY addr=1
app_main initializes NVS, netif, the default event loop, then starts
the Ethernet driver and waits up to 30s for an IP. On success it logs
the IP; on timeout it logs a warning and proceeds (the driver keeps
retrying in the background).
sdkconfig: declare 16 MB flash so partitions.csv (6.1 MB) fits.
main/CMakeLists.txt: explicit REQUIRES esp_eth esp_event esp_netif
nvs_flash.
Acceptance (per M1 in the impl guide): device gets a DHCP lease over
Ethernet and prints its IP. Build is clean against ESP-IDF 5.4 for
target esp32p4.
|
|
Plain ESP-IDF project targeting Waveshare ESP32-P4-ETH-POE with a 5" 800x480
MIPI-DSI capacitive touch panel. Stub app_main with TODOs for Ethernet, mDNS,
HTTP API (/health, /config, /frame, /sleep, /brightness), JPEG decode, and
touch callback delivery per the v1 spec in README.md.
|
