|
- bootstrap: drain the shutdown-cleaner array FIRST, not after the child
re-discovery loop. The old order tore down the listeners the loop had
just attached, and since the instance maps still referenced them the
attachListener fast-path blocked the 5-min register-cycle self-heal
from ever re-attaching after a warm re-paste. The attach cleaner now
also invalidates listeners/attachedCameraId (one cleaner per attach),
so a drain by another instance can't strand dead registrations either.
- stream socket: single-flight reconnect scheduled from 'close' only.
A failed connect emits 'error' then 'close'; scheduling from both
doubled outstanding attempts every 500ms against a rebooting device.
openStreamSocket also destroys the previous socket first.
- onRequest wake: same streams/streamStarting guard as every other start
path (a concurrent second startStream overwrote the streams entry and
orphaned the first ffmpeg), respond 204 immediately (the device's POST
times out at 1s — awaiting startStream turned every tap-wake into a
firmware state_post_failure), and skip the redundant wake POST back.
- startStream: bail-out paths after the wake POST (camera missing, no
usable stream, ffmpeg-input conversion failure) now send a
compensating sleep instead of stranding the panel on Loading; the
last-ditch getVideoStream fallback no longer rejects out of the call.
- key streams/streamStarting/stopStream by nativeId — v.name drifts to
the nativeId on reload, stranding or duplicating streams keyed under
the drifted value; findByName matches display_name first for the same
reason.
- idle_timeout_ms=0: the Scrypted-side safety timeout still reclaims
ffmpeg/socket but no longer POSTs sleep over the always-on setting.
- pending bindingDebounce timers cleared across re-paste (they fired
against the dead instance and attached duplicate listeners);
releaseDevice drops lastRegisterSig/streamStarting/debounce entries.
- start() single-flights bootstrap; createDevice drops its redundant
second registerViewport; streamLogger rolls its window on quiet ticks
(post-lull rates were diluted) and lastLogUs -> lastLogMs; hoist the
JPEG EOI needle + resume-scan offset in the demux loop; postJSON drops
the dead 204 check; remove unused sandbox declares and the legacy
streams.interval field.
- tsconfig: moduleResolution Node -> Bundler (removed in TS 6).
|
|
Convert the Scripts-plugin script from a hardcoded BINDINGS constant
into a DeviceProvider + DeviceCreator + HttpRequestHandler. Each
viewport is now a child Scrypted device under the parent script with
its own Settings page; operators add, edit, and delete viewports
entirely through the Scrypted UI.
Parent (ScryptedViewportProvider):
- DeviceProvider: getDevice(nativeId) instantiates a Viewport, attaches
its camera event listener, and posts /config. releaseDevice tears
down stream + listener + child storage entry.
- DeviceCreator: "+ Add Device" on the parent's page shows a small form
(name / host / camera picker filtered to Camera interfaces /
orientation choice). createDevice() pre-populates the child's storage
via deviceManager.getDeviceStorage(nativeId) and registers it under
the parent.
- Tracks known child nativeIds in its own storage as a JSON array so it
can eagerly instantiate every child on plugin start (each
registration + camera subscription happens at load time, not lazily).
- 5-min re-register loop catches devices that rebooted or got new DHCP
leases.
- HttpRequestHandler routes POST <base>/state on the parent's endpoint;
body {viewport, state} is matched against child names. Honors the
spec race rules: every callback cancels any prior stream + safety
timer for that viewport before applying the new state, and a /frame
409 stops the stream without echoing sleep back.
- Global tuning (frame_interval_ms) lives on the parent's Settings.
Child (Viewport):
- Settings: host (string), camera (type=device with deviceFilter for
the Camera interface — the UX win), orientation (choices), idle
timeout, brightness. All persisted via this.storage.
- putSetting fires onBindingChanged() on the parent so re-register +
re-subscribe happen immediately when any field changes.
scrypted/README.md rewritten for the UI-driven flow — install + add
device + edit + remove + global tuning + smoke test — no more "edit
BINDINGS and re-save."
scrypted/package.json + tsconfig.json: optional `npm install` so
editors can resolve @scrypted/sdk types. Nothing here ships — install
remains "paste into Scripts plugin." node_modules ignored.
|
