|
Previously the 4-line "identity" screen showed only viewport name, mDNS
host, IP, and state. Expanded to 15 lines covering the full GET /config
+ GET /state output (name, host, ip, state, configured, scrypted,
orientation, brightness, idle, fw, uptime, frames, errs, free heap,
free PSRAM), label/value pairs left-aligned with auto-scaled font.
Renames "identity" → "info" throughout — symbol, log messages,
README/TESTING references.
Also:
- Move the info-screen render's big locals (~1.6 KiB: lines[16][80] +
scrypt[256] + vp_name[64]) to BSS. The touch task's 3 KiB stack
was overflowing on every long-press, leaving whatever frame was
previously on the panel — gave the appearance of a "blue screen"
after the M5 test pattern.
- Drop the ≥5 s touch factory-reset gesture and remove all stale
references to it in docs and comments. NVS wipe is now a USB-side
`idf.py erase-flash` operation only.
- M5 follow-up TODO in jpeg_decoder.c: solid green renders ~black and
solid blue renders green; not a byte-order issue (BGR setting turns
red into blue). Tracked as a known M5 gap.
|
|
jpeg_decoder.{h,c} wraps esp_driver_jpeg (ESP32-P4 hardware decoder).
- One-time engine + DMA-aligned PSRAM scratch buffer setup (1 MB input,
768 KB output @ panel native 800x480 RGB565).
- try_lock + unlock so concurrent /frame POSTs get 503 instead of
queueing, per spec.
- jpeg_decoder_get_info() reports the dimensions; the http handler
validates them against the effective resolution before painting.
display.h adds display_present_rgb565(src, w, h):
- Landscape: src is 800x480, memcpy 1:1 into the panel framebuffer.
- Portrait: src is 480x800, software rotate 90° CW into the 800x480
panel framebuffer. (PPA / 2D-DMA hardware rotation is a later
optimization if portrait latency matters.)
http_api.c adds POST /frame:
- Content-Type must be image/jpeg → else 400.
- Empty body → 400. > 1 MB → 413. Display not initialized → 500.
- jpeg_decoder_try_lock(0) for concurrency: second post returns 503.
- Body streamed into the decoder's input buffer in chunks.
- Decode failure or dimension mismatch → 400 + decode_errors++.
- Paint failure → 500.
- Success → frames_received++, last_frame_us = esp_timer_get_time(),
204 No Content.
app_main initializes the JPEG decoder after display_init(). Both are
best-effort: failures log a warning and leave the rest of the firmware
running.
CMakeLists.txt: add esp_driver_jpeg to REQUIRES.
Known gap (M6 closes it): /frame currently paints regardless of
wake/sleep state. The 409-when-asleep rule lands with POST /state
in M6.
Build clean against ESP-IDF 5.4 (binary ~640 KB).
TESTING.md M5 expanded with portrait/landscape test commands,
ImageMagick test-image recipes, the full negative matrix (wrong
Content-Type, oversize, wrong dims, concurrent, garbage), and the
M6 dependency note.
|
