|
- viewport_state.{h,c}: shared state struct (config, run-state, counters,
orientation, timestamps) behind a FreeRTOS mutex. Modules update it
under viewport_state_lock(); GET /state serializes a snapshot.
- http_api.{h,c}: starts esp_http_server on :80, registers GET /state.
Returns the full JSON shape from the spec (name, version, configured,
state, uptime_ms, last_frame_ms_ago, frames_received, decode_errors,
state_post_failures, resolution, ip, free_heap, free_psram).
- mdns_service.{h,c}: mdns_init + advertise _scrypted-viewport._tcp.local
on :80 with version/resolution/orientation/name TXT records.
mdns_service_refresh() reapplies hostname + TXT after /config writes
(called from M4 onward).
- main/CMakeLists.txt: add esp_http_server, esp_timer, json, mdns to
REQUIRES. espressif/mdns added as managed component via
main/idf_component.yml.
app_main calls viewport_state_init early so any module can read defaults
before /config arrives.
Also adds TESTING.md tracking per-milestone verification status and an
integration test plan to run after M9 (races, failure modes, longevity,
power cycles, negative protocol, multi-viewport).
M1 promoted to "🟡 builds clean" in TESTING.md; combined HW verification
of M1+M2 will be one flash session. Build verified against ESP-IDF 5.4
for target esp32p4 (binary ~550 KB).
|
|
net_eth module brings up the Waveshare ESP32-P4-ETH-POE Ethernet
interface (internal EMAC + IP101GRI PHY) and waits for a DHCP lease.
Pin map confirmed via Waveshare wiki + ESPHome's working config:
MDC=31, MDIO=52, REF_CLK=50 (CLK_EXT_IN from PHY)
TX_EN=49, TXD0=34, TXD1=35
CRS_DV=28, RXD0=30, RXD1=29
PHY reset/enable=51, PHY addr=1
app_main initializes NVS, netif, the default event loop, then starts
the Ethernet driver and waits up to 30s for an IP. On success it logs
the IP; on timeout it logs a warning and proceeds (the driver keeps
retrying in the background).
sdkconfig: declare 16 MB flash so partitions.csv (6.1 MB) fits.
main/CMakeLists.txt: explicit REQUIRES esp_eth esp_event esp_netif
nvs_flash.
Acceptance (per M1 in the impl guide): device gets a DHCP lease over
Ethernet and prints its IP. Build is clean against ESP-IDF 5.4 for
target esp32p4.
|
|
Plain ESP-IDF project targeting Waveshare ESP32-P4-ETH-POE with a 5" 800x480
MIPI-DSI capacitive touch panel. Stub app_main with TODOs for Ethernet, mDNS,
HTTP API (/health, /config, /frame, /sleep, /brightness), JPEG decode, and
touch callback delivery per the v1 spec in README.md.
|
