| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
Three structural shifts:
1. Discovery section spells out mDNS-SD. The ESP32 runs the ESP-IDF
mdns responder and serves all .local records itself — A, SRV, PTR,
TXT. Scrypted browses _scrypted-viewport._tcp.local with a Node
mDNS-SD library that hits the multicast layer directly. Scrypted
uses the IP from the SRV/A record, NOT OS-level .local hostname
resolution. Re-browse every few minutes for DHCP renumbering.
Manual host:port fallback for non-mDNS deployments.
2. Drop "callback" framing. The device and Scrypted are HTTP peers,
both exposing POST /state with the same body shape {viewport,state}.
Either side can push to the other to set state. Section is renamed
"Device -> Scrypted POST /state". No new vocabulary or semantics —
just the truth about what the protocol is.
- state_post_failures (was: callback_failures)
- state_client.c (was: callback_client.c)
- "callback" replaced with "outbound POST" / "inbound POST" / just
"POST /state" throughout.
3. Explicit no-application-level-ack clause. HTTP 2xx is transport-
only. Device does not retry, does not block subsequent state
changes on the response, does not treat 5xx as anything beyond a
counter increment. Idempotency + /frame 409 + each side's idle
timer cover every failure mode. Scrypted-side logic must not wait
for the device to confirm a state change.
Also: Scrypted Integration code in v2 guide rewritten to discover via
bonjour-service browse rather than hardcoded viewport-<name>.local
URLs. urlFor(name) function resolves the discovered IP per call.
mdns_service.c module spec now explicitly notes Scrypted uses the
browse, not the hostname.
|
|
API surface is now:
GET /state runtime status (replaces /health)
GET /config persisted config
POST /config partial update; brightness is now a field here
POST /state {state: wake|sleep} (replaces /wake and /sleep)
POST /frame unchanged
POST /config now does a partial merge — only present fields are
written. To tweak only brightness, POST {"brightness": 50}.
POST /state replaces POST /wake and POST /sleep with a single
endpoint that takes {state: "wake"|"sleep"}. Idempotent: no-op if
already in the requested state.
Brightness is no longer its own endpoint; it lives in /config with
all the other persisted settings. PWM remains gamma-corrected.
Callback body renamed:
was: {event: wake|sleep, type: tap|timeout}
now: {state: wake|sleep, event: tap|timeout}
The new naming matches POST /state: "state" is the resulting wake/
sleep state and the imperative for Scrypted; "event" is the cause
(tap, timeout, future swipes).
Doc sync: README API/Wake-Sleep/Idempotency/Integration sections and
v2 impl guide API contract, modules, milestones, acceptance criteria
all updated to the new model.
|
|
Previously M5 (Wake/Sleep + idle timer) and M4 (Frame) implicitly
depended on NVS values (orientation, idle_timeout_ms) that did not
exist until M6 (Config Persistence). Moving Config to M4 lets the
downstream endpoints read their parameters from NVS instead of
working around hardcoded defaults.
New order:
M1 Board Bring-Up
M2 HTTP + mDNS
M3 Display Bring-Up
M4 Config Persistence (was M6)
M5 JPEG Frame Push (was M4)
M6 Wake/Sleep/Brightness (was M5)
M7 Touch Callback
M8 Local Screens + BOOT button
M9 Live Stream (/stream)
M4 now also validates orientation and idle_timeout_ms per spec,
applies orientation immediately (mDNS TXT + /health reflect it), and
establishes the brightness default (80) on first boot. M5's test
image is 480x800 by default (portrait); switch to 800x480 if /config
sets landscape. M6's idle timer reads idle_timeout_ms from NVS.
|
|
State model is now strictly wake/sleep, owned by the device:
- Local triggers: tap (toggle), idle timeout (sleep only).
- Remote triggers: POST /wake, POST /sleep. Scrypted decides why
(doorbell, motion, person, schedule) — the device does not know.
- /frame is pure paint: 204 when awake, 409 when asleep, no implicit
wake. Eliminates the race where an in-flight frame could re-wake a
device that just slept on a tap.
Orientation:
- Configurable via /config; default portrait.
- Effective resolution: 480x800 portrait, 800x480 landscape.
- Scrypted must render at the effective resolution. Device does not
rotate or scale JPEG content.
- Orientation flows through mDNS TXT, /health, IP/Loading screens.
Callbacks:
- Add `type` field carrying the cause: tap or timeout (forward-compat
for swipes etc).
- Drop wall-clock timestamp (no RTC, no SNTP).
Other:
- Boot: configured device boots to sleep (backlight off).
- /health adds state, last_frame_ms_ago, frame counters, error
counters, brightness, orientation, idle_timeout_ms.
- idle_timeout_ms: 0 disables; non-zero must be >= 5000; else 400.
- First-boot brightness default 80; apply gamma curve to PWM.
- Watchdog reboots hung tasks; recovers state from NVS.
- On-board status LED indicates network/config state.
- mDNS hostname-collision warning; ops notes.
- Idempotency table summarizing endpoint safety.
- Each viewport is bound 1:1 to a camera in Scrypted-side code.
- Reframe "no rendering engine" honestly as "no general-purpose UI
framework"; IP and Loading screens are the only locally-drawn UI.
Doc sync: v2 implementation guide endpoints, modules, milestones,
acceptance criteria, error handling, and tests all updated to match.
|
|
- Couple backlight and Scrypted streaming as a single wake/sleep state owned by the device.
- Callback events are idempotent imperatives: wake = "start streaming", sleep = "stop streaming". Scrypted does not track viewport state.
- Each viewport is bound to one camera in Scrypted-side code; camera events (doorbell, person, motion) drive streaming.
- idle_timeout_ms set by Scrypted via /config (default 60000). Same value on both sides; timers run independently and either can end a session.
- Tap input only (long_press/swipes out of scope for v1). Tap is internal; callback carries the resulting state.
- IP screen on first boot, after factory reset, and as a 15s BOOT short-press overlay.
- Loading screen between wake and the next /frame.
- BOOT: short press = IP overlay, hold 5s = factory reset.
- Note that Scrypted side is code (Script for v1, custom plugin for v2 with /stream), not configuration.
|
|
Expand README with per-endpoint contracts (response codes, persistence,
size limits, idle/wake semantics) and a Scrypted integration section
covering registration, frame push, and touch handling. Add v2
implementation guide adapted from the DoorView spec.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
|
Plain ESP-IDF project targeting Waveshare ESP32-P4-ETH-POE with a 5" 800x480
MIPI-DSI capacitive touch panel. Stub app_main with TODOs for Ethernet, mDNS,
HTTP API (/health, /config, /frame, /sleep, /brightness), JPEG decode, and
touch callback delivery per the v1 spec in README.md.
|
