M3 done: drop boot test, fold BOOT button into touch long-press

The Waveshare ESP32-P4-ETH board exposes BOOT on GPIO 35, but at runtime
that pin is owned by the EMAC TXD1 signal. No usable GPIO is wired to a
separate user button, so the BOOT-button task could never fire.

Move both BOOT-button behaviours onto the touch panel:
  - ≥1.5s hold → 15s identity overlay (was BOOT short-press)
  - ≥5s hold   → factory reset (was BOOT long-hold)
Short tap (<500ms) still toggles wake/sleep. Long-press fires while the
finger is still down so the user gets immediate feedback at each
threshold.

Also strip the R/G/B 6 s boot test sequence — the panel now renders
correctly, so it's no longer useful diagnostically.

Boot subsystem flags drop the trailing B column: [EMHDJT].

0 files changed, 0 insertions, 0 deletions