M1 + M2 hardware-verified 2026-06-14 (Waveshare ESP32-P4-ETH)

First end-to-end bench verification. Board is the Waveshare
ESP32-P4-ETH (Amazon B0FN7JQ2V8), 32 MB PSRAM, 32 MB flash silkscreen,
ESP-IDF v5.4.1. No panel attached, just board on USB power + LAN.

What passed
-----------
M1 — Ethernet driver up; DHCP lease landed at 10.0.13.83 (gw
10.0.13.1, netmask 255.255.255.0). MAC e8:f6:0a:e0:90:94. 31.7 MB
PSRAM free. Boot completes in ~4s after the kernel handoff.

M2 — GET http://10.0.13.83/state returns the full spec JSON shape
(name=null, configured=false, state=unconfigured, resolution=480x800,
ip=10.0.13.83, free_heap=520995, free_psram=31730048, all counters at
0). mDNS browse from macOS (dns-sd -B _scrypted-viewport._tcp local.)
finds one instance named "viewport" within ~100ms.

Bare-board behavior (Ethernet unplugged) verified too: boot completes
cleanly with summary line `boot complete — subsystems [EMHdJ-B]
ip=(no link)`. Lowercase d = display down because no panel attached;
- for touch because it shares the panel I²C bus.

README status snapshot updated to reflect M1+M2 ✅ on hardware;
TESTING.md M1 and M2 sections gain the 2026-06-14 verification note
plus the three fixes that bring-up exposed (RXD0/RXD1 swap, mDNS
hostname order, elegant subsystem degradation — already shipped in
commit 220ee4c).

2 files changed, 13 insertions, 7 deletions

diff --git a/README.md b/README.md
index 17d346c..e301c88 100644
--- a/README.md
+++ b/README.md
@@ -30,7 +30,7 @@ Scrypted Viewport owns Ethernet, JPEG decode, display, touch input and outbound
 
 | Layer | Where we are | What's pending |
 | --- | --- | --- |
-| Firmware (`main/`) | M1–M8 implemented; binary ~870 KB; builds clean against ESP-IDF 5.4 for `esp32p4`. | M9 (`POST /stream`) not started. **Zero milestones verified on hardware yet.** |
+| Firmware (`main/`) | M1–M8 implemented; binary ~870 KB; builds clean against ESP-IDF 5.4 for `esp32p4`. **M1 + M2 ✅ verified on hardware** (2026-06-14, Ethernet + `GET /state` + mDNS browse). | M9 (`POST /stream`) not started. M3–M8 still 🟡 (panel not yet attached). |
 | Scrypted side (`scrypted/`) | v1 Script — DeviceProvider with per-viewport child devices, camera picker, mDNS auto-resolve. | v2 plugin (packaged + FFmpeg streaming to `/stream`) not started. Script unverified end-to-end. |
 | Hardware | Ethernet pin map confirmed (Waveshare wiki + ESPHome). Hosyond panel architecture confirmed (Pi 7"-style, TC358762 bridge + ATTINY MCU at I²C `0x45`). Jumper wiring documented. | Schematic confirmation needed for DSI FPC pin count, I²C GPIO mapping, BOOT button GPIO, flash size. All gated by [`TESTING.md`'s Hardware prerequisites](TESTING.md#hardware-prerequisites). |
 
diff --git a/TESTING.md b/TESTING.md
index b3500ef..3350611 100644
--- a/TESTING.md
+++ b/TESTING.md
@@ -20,8 +20,8 @@ Status legend:
 
 | # | Milestone | Code | HW |
 | --- | --- | --- | --- |
-| M1 | Board Bring-Up — Ethernet + DHCP | ✅ | 🟡 |
-| M2 | HTTP + mDNS (`GET /state`) | ✅ | 🟡 |
+| M1 | Board Bring-Up — Ethernet + DHCP | ✅ | ✅ |
+| M2 | HTTP + mDNS (`GET /state`) | ✅ | ✅ |
 | M3 | Display Bring-Up (Hosyond panel) | ✅ | 🟡 |
 | M4 | Config Persistence (NVS, partial updates) | ✅ | 🟡 |
 | M5 | JPEG Frame Push (`POST /frame`) | ✅ | 🟡 |
@@ -122,9 +122,10 @@ Cross-check from another host:
 ping 192.168.x.x
 ```
 
-**Status**: 🟡 builds clean against ESP-IDF 5.4 (commit e2ac22e). Not yet flashed to hardware — awaiting first board run.
-
-> Combined hardware verification of M1+M2 is fine — they both run from the same flash session.
+**Status**: ✅ verified 2026-06-14 on Waveshare ESP32-P4-ETH (Amazon B0FN7JQ2V8, 32 MB PSRAM, 32 MB flash silkscreen, IDF v5.4.1). DHCP lease landed at 10.0.13.83. Three fixes were needed during bring-up — see commit 220ee4c:
+> 1. **RXD0 / RXD1 GPIO swap**: ESP32-P4 EMAC iomux fixes RXD0=29, RXD1=30. The original pin map had them transposed.
+> 2. **mDNS hostname order**: `mdns_service_add()` returns INVALID_ARG if hostname isn't set yet. Now init → hostname → service_add → TXT.
+> 3. **`app_main` best-effort everywhere**: any one missing subsystem (no LAN, no panel) used to abort the boot. Now each is independent; final log line summarizes which letters of `EMHDJTB` came up.
 
 ---
 
@@ -170,7 +171,12 @@ Expected `/state` body on a fresh device (unconfigured):
 
 Expected mDNS browse output should show a `_scrypted-viewport._tcp` instance with TXT records `version=`, `resolution=`, `orientation=`, `name=` (empty for `name`).
 
-**Status**: 🟡 builds clean against ESP-IDF 5.4 with espressif/mdns managed component. Awaiting first board run.
+**Status**: ✅ verified 2026-06-14 alongside M1.
+
+- `GET http://10.0.13.83/state` returned the full spec JSON: `name=null, configured=false, state=unconfigured, resolution=480x800, ip=10.0.13.83, free_psram=31730048, ...`.
+- `dns-sd -B _scrypted-viewport._tcp local.` on macOS surfaced one instance named `viewport`.
+
+Bare-board behavior (no panel, no ethernet) was also verified — the device boots cleanly and prints a summary like `boot complete — subsystems [EMHdJ-B]  ip=(no link)` (lowercase `d` = display down because no panel attached; `-` for touch because it shares the panel I²C bus).
 
 ---