diff options
Diffstat (limited to 'main/src/led.c')
| -rw-r--r-- | main/src/led.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/main/src/led.c b/main/src/led.c index b000e18..55c6ae4 100644 --- a/main/src/led.c +++ b/main/src/led.c @@ -7,31 +7,31 @@ #include <led.h> #include <intercom.h> -#define LED_ON 1 #define LED_OFF 0 -#define LED_DELAY 500 +#define LED_ON 1 +#define LED_DELAY_MILLIS 500 #define LED_NUM_BLINK 3 -int intercom_led_identify(hap_acc_t *ha) +int led_identify(hap_acc_t *ha) { ESP_LOGI(TAG, "accessory identified"); for (int i = 0; i < LED_NUM_BLINK; i++) { gpio_set_level(GPIO_NUM_13, LED_ON); - vTaskDelay(pdMS_TO_TICKS(LED_DELAY)); + vTaskDelay(pdMS_TO_TICKS(LED_DELAY_MILLIS)); gpio_set_level(GPIO_NUM_13, LED_OFF); - vTaskDelay(pdMS_TO_TICKS(LED_DELAY)); + vTaskDelay(pdMS_TO_TICKS(LED_DELAY_MILLIS)); } return HAP_SUCCESS; } -void intercom_led_init() +void led_identify_service_init() { gpio_config_t io_conf; - io_conf.intr_type = GPIO_INTR_DISABLE; /* Interrupt for falling edge */ - io_conf.pin_bit_mask = GPIO_SEL_13; /* Bit mask of the pins */ - io_conf.mode = GPIO_MODE_OUTPUT; /* Set as input mode */ - io_conf.pull_up_en = GPIO_PULLUP_DISABLE; /* Disable internal pull-up */ - io_conf.pull_down_en = GPIO_PULLDOWN_ENABLE; /* Enable internal pull-down */ - gpio_config(&io_conf); /* Set the GPIO configuration */ + io_conf.intr_type = GPIO_INTR_DISABLE; + io_conf.pin_bit_mask = GPIO_SEL_13; + io_conf.mode = GPIO_MODE_OUTPUT; + io_conf.pull_up_en = GPIO_PULLUP_DISABLE; + io_conf.pull_down_en = GPIO_PULLDOWN_ENABLE; + gpio_config(&io_conf); }
\ No newline at end of file |