diff -r 22c06d6916bf -r d843011c249d ngircd/templates/ngircd.conf.j2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ngircd/templates/ngircd.conf.j2	Sat Jul 04 11:00:20 2020 -0500
@@ -0,0 +1,422 @@
+#
+# This is a sample configuration file for the ngIRCd IRC daemon, which must
+# be customized to the local preferences and needs.
+#
+# Comments are started with "#" or ";".
+#
+# A lot of configuration options in this file start with a ";". You have
+# to remove the ";" in front of each variable to actually set a value!
+# The disabled variables are shown with example values for completeness only
+# and the daemon is using compiled-in default settings.
+#
+# Use "ngircd --configtest" (see manual page ngircd(8)) to validate that the
+# server interprets the configuration file as expected!
+#
+# Please see ngircd.conf(5) for a complete list of configuration options
+# and their descriptions.
+#
+# The original can be found at:
+# /usr/share/doc/ngircd/sample-ngircd.conf.gz
+
+[Global]
+        # The [Global] section of this file is used to define the main
+        # configuration of the server, like the server name and the ports
+        # on which the server should be listening.
+        # These settings depend on your personal preferences, so you should
+        # make sure that they correspond to your installation and setup!
+
+        # Server name in the IRC network, must contain at least one dot
+        # (".") and be unique in the IRC network. Required!
+        Name = {{ngircd_name}}
+
+        # Information about the server and the administrator, used by the
+        # ADMIN command. Not required by server but by RFC!
+        AdminInfo1 = {{ngircd_admin_name}}
+        ;AdminInfo2 = Debian City
+        AdminEMail = {{ngircd_admin_email}}
+
+        # Text file which contains the ngIRCd help text. This file is required
+        # to display help texts when using the "HELP <cmd>" command.
+        ;HelpFile = /usr/share/doc/ngircd/Commands.txt
+
+        # Info text of the server. This will be shown by WHOIS and
+        # LINKS requests for example.
+        Info = {{ngircd_name}}
+
+        # Comma separated list of IP addresses on which the server should
+        # listen. Default values are:
+        # "0.0.0.0" or (if compiled with IPv6 support) "::,0.0.0.0"
+        # so the server listens on all IP addresses of the system by default.
+        Listen = 127.0.0.1
+
+        # Text file with the "message of the day" (MOTD). This message will
+        # be shown to all users connecting to the server:
+        MotdFile = /etc/ngircd/ngircd.motd
+
+        # A simple Phrase (<127 chars) if you don't want to use a motd file.
+        ;MotdPhrase = "Hello. This is the Debian default MOTD sentence"
+
+        # The name of the IRC network to which this server belongs. This name
+        # is optional, should only contain ASCII characters, and can't contain
+        # spaces. It is only used to inform clients. The default is empty,
+        # so no network name is announced to clients.
+        ;Network = aIRCnetwork
+
+        # Global password for all users needed to connect to the server.
+        # (Default: not set)
+        ;Password = wealllikedebian
+
+        # This tells ngIRCd to write its current process ID to a file.
+        # Note that the pidfile is written AFTER chroot and switching the
+        # user ID, e.g. the directory the pidfile resides in must be
+        # writable by the ngIRCd user and exist in the chroot directory.
+        # Keep this setting in sync with PIDFILE in /etc/init.d/ngircd
+        PidFile = /var/run/ngircd/ngircd.pid
+
+        # Ports on which the server should listen. There may be more than
+        # one port, separated with ",". (Default: 6667)
+        ;Ports = 6667, 6668, 6669
+
+        # Group ID under which the ngIRCd should run; you can use the name
+        # of the group or the numerical ID. ATTENTION: For this to work the
+        # server must have been started with root privileges!
+        # Keep this setting in sync with DAEMONUSER in the init script and/or
+        # the Group= setting in service file.
+        ServerGID = irc
+
+        # User ID under which the server should run; you can use the name
+        # of the user or the numerical ID. ATTENTION: For this to work the
+        # server must have been started with root privileges! In addition,
+        # the configuration and MOTD files must be readable by this user,
+        # otherwise RESTART and REHASH won't work!
+        # Keep this setting in sync with DAEMONUSER in the init script and/or
+        # the User= setting in service file.
+        ServerUID = irc
+
+[Limits]
+        # Define some limits and timeouts for this ngIRCd instance. Default
+        # values should be safe, but it is wise to double-check :-)
+
+        # The server tries every <ConnectRetry> seconds to establish a link
+        # to not yet (or no longer) connected servers.
+        ConnectRetry = 60
+
+        # Number of seconds after which the whole daemon should shutdown when
+        # no connections are left active after handling at least one client
+        # (0: never, which is the default).
+        # This can be useful for testing or when ngIRCd is started using
+        # "socket activation" with systemd(8), for example.
+        ;IdleTimeout = 0
+
+        # Maximum number of simultaneous in- and outbound connections the
+        # server is allowed to accept (0: unlimited):
+        MaxConnections = 500
+
+        # Maximum number of simultaneous connections from a single IP address
+        # the server will accept (0: unlimited):
+        MaxConnectionsIP = 10
+
+        # Maximum number of channels a user can be member of (0: no limit):
+        MaxJoins = 10
+
+        # Maximum length of an user nickname (Default: 9, as in RFC 2812).
+        # Please note that all servers in an IRC network MUST use the same
+        # maximum nickname length!
+        ;MaxNickLength = 9
+
+        # Maximum penalty time increase in seconds, per penalty event. Set to -1
+        # for no limit (the default), 0 to disable penalties altogether. The
+        # daemon doesn't use penalty increases higher than 2 seconds during
+        # normal operation, so values greater than 1 rarely make sense.
+        ;MaxPenaltyTime = -1
+
+        # Maximum number of channels returned in response to a /list
+        # command (0: unlimited):
+        ;MaxListSize = 100
+
+        # After <PingTimeout> seconds of inactivity the server will send a
+        # PING to the peer to test whether it is alive or not.
+        PingTimeout = 120
+
+        # If a client fails to answer a PING with a PONG within <PongTimeout>
+        # seconds, it will be disconnected by the server.
+        PongTimeout = 20
+
+[Options]
+        # Optional features and configuration options to further tweak the
+        # behavior of ngIRCd. If you want to get started quickly, you most
+        # probably don't have to make changes here -- they are all optional.
+
+        # List of allowed channel types (channel prefixes) for newly created
+        # channels on the local server. By default, all supported channel
+        # types are allowed. Set this variable to the empty string to disallow
+        # creation of new channels by local clients at all.
+        ;AllowedChannelTypes = #&+
+
+        # Are remote IRC operators allowed to control this server, e.g.
+        # use commands like CONNECT, SQUIT, DIE, ...?
+        ;AllowRemoteOper = no
+
+        # A directory to chroot in when everything is initialized. It
+        # doesn't need to be populated if ngIRCd is compiled as a static
+        # binary. By default ngIRCd won't use the chroot() feature.
+        # ATTENTION: For this to work the server must have been started
+        # with root privileges!
+        ;ChrootDir = /var/empty
+
+        # Set this hostname for every client instead of the real one.
+        # Use %x to add the hashed value of the original hostname.
+        {% if ngircd_cloak is defined %}
+        CloakHost = {{ngircd_cloak}}
+        {% endif %}
+
+        # Use this hostname for hostname cloaking on clients that have the
+        # user mode "+x" set, instead of the name of the server.
+        # Use %x to add the hashed value of the original hostname.
+        ;CloakHostModeX = cloaked.user
+
+        # The Salt for cloaked hostname hashing. When undefined a random
+        # hash is generated after each server start.
+        ;CloakHostSalt = abcdefghijklmnopqrstuvwxyz
+
+        # Set every clients' user name to their nickname
+        ;CloakUserToNick = yes
+
+        # Try to connect to other IRC servers using IPv4 and IPv6, if possible.
+        ;ConnectIPv6 = yes
+        ;ConnectIPv4 = yes
+
+        # Default user mode(s) to set on new local clients. Please note that
+        # only modes can be set that the client could set using regular MODE
+        # commands, you can't set "a" (away) for example! Default: none.
+        ;DefaultUserModes = i
+
+        # Do DNS lookups when a client connects to the server.
+        ;DNS = yes
+
+        # Do IDENT lookups if ngIRCd has been compiled with support for it.
+        # Users identified using IDENT are registered without the "~" character
+        # prepended to their user name.
+        ;Ident = yes
+
+        # Directory containing configuration snippets (*.conf), that should
+        # be read in after parsing this configuration file.
+        ;IncludeDir = /etc/ngircd/conf.d
+
+        # Enhance user privacy slightly (useful for IRC server on TOR or I2P)
+        # by censoring some information like idle time, logon time, etc.
+        ;MorePrivacy = no
+
+        # Normally ngIRCd doesn't send any messages to a client until it is
+        # registered. Enable this option to let the daemon send "NOTICE *"
+        # messages to clients while connecting.
+        ;NoticeBeforeRegistration = no
+
+        # Should IRC Operators be allowed to use the MODE command even if
+        # they are not(!) channel-operators?
+        OperCanUseMode = yes
+
+        # Should IRC Operators get AutoOp (+o) in persistent (+P) channels?
+        ;OperChanPAutoOp = yes
+
+        # Mask IRC Operator mode requests as if they were coming from the
+        # server? (This is a compatibility hack for ircd-irc2 servers)
+        ;OperServerMode = no
+
+        # Use PAM if ngIRCd has been compiled with support for it.
+        # Users identified using PAM are registered without the "~" character
+        # prepended to their user name.
+        PAM = no
+
+        # When PAM is enabled, all clients are required to be authenticated
+        # using PAM; connecting to the server without successful PAM
+        # authentication isn't possible.
+        # If this option is set, clients not sending a password are still
+        # allowed to connect: they won't become "identified" and keep the "~"
+        # character prepended to their supplied user name.
+        # Please note: To make some use of this behavior, it most probably
+        # isn't useful to enable "Ident", "PAM" and "PAMIsOptional" at the
+        # same time, because you wouldn't be able to distinguish between
+        # Ident'ified and PAM-authenticated users: both don't have a "~"
+        # character prepended to their respective user names!
+        ;PAMIsOptional = no
+
+        # When PAM is enabled, this value determines the used PAM
+        # configuration.
+        # This setting allows to run multiple ngIRCd instances with
+        # different PAM configurations on each instance.
+        # If you set it to "ngircd-foo", PAM will use
+        # /etc/pam.d/ngircd-foo instead of the default
+        # /etc/pam.d/ngircd.
+        ;PAMServiceName = ngircd
+
+        # Let ngIRCd send an "authentication PING" when a new client connects,
+        # and register this client only after receiving the corresponding
+        # "PONG" reply.
+        ;RequireAuthPing = no
+
+        # Silently drop all incoming CTCP requests.
+        ;ScrubCTCP = no
+
+        # Syslog "facility" to which ngIRCd should send log messages.
+        # Possible values are system dependent, but most probably auth, daemon,
+        # user and local1 through local7 are possible values; see syslog(3).
+        # Default is "local5" for historical reasons, you probably want to
+        # change this to "daemon", for example.
+        SyslogFacility = local1
+
+        # Password required for using the WEBIRC command used by some
+        # Web-to-IRC gateways. If not set/empty, the WEBIRC command can't
+        # be used. (Default: not set)
+        ;WebircPassword = xyz
+
+[SSL]
+        # SSL-related configuration options. Please note that this section
+        # is only available when ngIRCd is compiled with support for SSL!
+        # So don't forget to remove the ";" above if this is the case ...
+
+        # SSL Server Key Certificate
+        ;CertFile = /etc/ssl/certs/server.crt
+
+        # Select cipher suites allowed for SSL/TLS connections. This defaults
+        # to HIGH:!aNULL:@STRENGTH (OpenSSL) or SECURE128 (GnuTLS).
+        # See 'man 1ssl ciphers' (OpenSSL) or 'man 3 gnutls_priority_init'
+        # (GnuTLS) for details.
+        # For OpenSSL:
+        ;CipherList = HIGH:!aNULL:@STRENGTH:!SSLv3
+        # For GnuTLS (this Debian package was linked against GnuTLS):
+        CipherList = SECURE128:-VERS-SSL3.0
+
+        # Diffie-Hellman parameters
+        ;DHFile = /etc/ngircd/dhparams.pem
+
+        # SSL Server Key
+        ;KeyFile = /etc/ssl/private/server.key
+
+        # password to decrypt SSLKeyFile (OpenSSL only)
+        # Note that this Debian package is linked against GnuTLS so this
+        # option has no effect.
+        ;KeyFilePassword = secret
+
+        # Additional Listen Ports that expect SSL/TLS encrypted connections
+        ;Ports = 6697, 9999
+
+{% for op in ngircd_ops %}
+[Operator]
+        # [Operator] sections are used to define IRC Operators. There may be
+        # more than one [Operator] block, one for each local operator.
+
+        # ID of the operator (may be different of the nickname)
+        Name = {{op.name}}
+
+        # Password of the IRC operator
+        Password = {{op.pass}}
+
+        # Optional Mask from which /OPER will be accepted
+        # Mask = *!ident@somewhere.example.com
+        {% if op.mask is defined %}
+        Mask = {{op.mask}}
+        {% endif %}
+
+{% endfor %}
+[Server]
+{% for server in ngircd_servers %}
+        # Other servers are configured in [Server] sections. If you
+        # configure a port for the connection, then this ngircd tries to
+        # connect to the other server on the given port; if not it waits
+        # for the other server to connect.
+        # There may be more than one server block, one for each server.
+        #
+        # Server Groups:
+        # The ngIRCd allows "server groups": You can assign an "ID" to every
+        # server with which you want this ngIRCd to link. If a server of a
+        # group won't answer, the ngIRCd tries to connect to the next server
+        # in the given group. But the ngircd never tries to connect to two
+        # servers with the same group ID.
+
+        # IRC name of the remote server, must match the "Name" variable in
+        # the [Global] section of the other server (when using ngIRCd).
+        Name = {{server.name}}
+
+        # Internet host name or IP address of the peer (only required when
+        # this server should establish the connection).
+        # Host = connect-to-host.example.net
+        {% if server.host is defined %}
+        Host = {{server.host}}
+        {% endif %}
+
+        # IP address to use as _source_ address for the connection. if
+        # unspecified, ngircd will let the operating system pick an address.
+        ;Bind = 10.0.0.1
+
+        # Port of the server to which the ngIRCd should connect. If you
+        # assign no port the ngIRCd waits for incoming connections.
+        ;Port = 6667
+
+        # Own password for the connection. This password has to be configured
+        # as "PeerPassword" on the other server.
+        MyPassword = {{server.pass}}
+
+        # Foreign password for this connection. This password has to be
+        # configured as "MyPassword" on the other server.
+        PeerPassword = {{server.pass}}
+
+        # Group of this server (optional)
+        ;Group = 123
+
+        # Set the "Passive" option to "yes" if you don't want this ngIRCd to
+        # connect to the configured peer (same as leaving the "Port" variable
+        # empty). The advantage of this option is that you can actually
+        # configure a port an use the IRC command CONNECT more easily to
+        # manually connect this specific server later.
+        ;Passive = no
+
+        # Connect to the remote server using TLS/SSL (Default: false)
+        ;SSLConnect = yes
+
+        # Define a (case insensitive) list of masks matching nicknames that
+        # should be treated as IRC services when introduced via this remote
+        # server, separated by commas (",").
+        # REGULAR SERVERS DON'T NEED this parameter, so leave it empty
+        # (which is the default).
+        # When you are connecting IRC services which mask as a IRC server
+        # and which use "virtual users" to communicate with, for example
+        # "NickServ" and "ChanServ", you should set this parameter to
+        # something like "*Serv" or "NickServ,ChanServ,XyzServ".
+        {% if server.service_mask is defined %}
+        ServiceMask = {{server.service_mask}}
+        {% endif %}
+
+{% endfor %}
+
+[Channel]
+        # Pre-defined channels can be configured in [Channel] sections.
+        # Such channels are created by the server when starting up and even
+        # persist when there are no more members left.
+        # Persistent channels are marked with the mode 'P', which can be set
+        # and unset by IRC operators like other modes on the fly.
+        # There may be more than one [Channel] block, one for each channel.
+
+        # Name of the channel
+        ;Name = #ngircd
+
+        # Topic for this channel
+        ;Topic = Our ngircd testing channel
+
+        # Initial channel modes
+        ;Modes = tnk
+
+        # initial channel password (mode k)
+        ;Key = Secret
+
+        # Key file, syntax for each line: "<user>:<nick>:<key>".
+        # Default: none.
+        ;KeyFile = /etc/ngircd/#chan.key
+
+        # maximum users per channel (mode l)
+        ;MaxUsers = 23
+
+[Channel]
+        # More [Channel] sections, if you like ...
+
+# -eof-